Buy and Sell Cisco PA-MC-2T3+
Cisco PA-MC-2T3+ 2-Port Multichannel T3 Port Adapter
The PA-MC-2T3+ T3 port is designed to receive and transmit at the DSX-3 level while driving and receiving from 75-ohm coaxial cables (ATT 734A or equivalent quality coax). The T3 port connects directly to any equipment with DSX-3 level BNC connectors.
In the channelized mode of operation, a PA-MC-2T3+ T3 link is channelized into 28 DS1 data lines in an industry standard multiplexing format.
In the unchannelized mode of operation, a T3 link provides a single high speed user data channel, rather than being multiplexed into 28 T1 lines. The data channel appears to the system as a serial interface that may be configured to use the full T3 bandwidth or a smaller portion of the T3 bandwidth.
Form Factor: Plug-In module
Input Signal: 0.035-1.1 volts peak
Output Signal: Able to drive 450 feet (135 meters) of 75-ohm coaxial cable (734A or equivalent) and meet pulse shape template
Data Transfer Rate: 44.736Mbps T3 Full-duplex at 450 ft
Status Indicators: Seven status LEDs located on its faceplate: ENABLED, ALARM, LOOP, LOS, OOF, AIS, and FERF
The PA-MC-2T3+ does not support more than 128 channels per T3, or use of unused channels of one T3 by the other T3